• The Plumbline
  • Boden Roofing Supplies
  • Kitchens by Boys and Boden
  • Pear Stairs Logo
  • The Plumbline
  • Boden Roofing Supplies
  • Kitchens by Boys and Boden
  • Pear Stairs Logo
Boys & Boden
All

Quote

You have no items in your quote.

Craftpro TCT Router Cutters

Shop By

Filter

Category
  1. Straight Flutes (136)
  2. Beads and Corner Moulds (15)
  3. Chamfer Cutters (22)
  4. Dovetails (20)
  5. Dowel Drills (6)
  6. Intumescent Recessing (5)
  7. Jointing Cutters (4)
  8. Ogee Cutters (12)
  9. Ogee Panel Cutters (9)
  10. Ovolo and Handrail (22)
  11. Ovolo Beads (8)
  12. Ovolo Jointers & Scribers (11)
  13. Panel Door Sets (6)
  14. Panel Raisers (10)
  15. Profile Scribers (8)
  16. Profilers (10)
  17. Radius and Cavetto (29)
  18. Rebaters (7)
  19. Slotters (14)
  20. Trimmers (22)
  21. Weatherseal Cutters (13)
Brand
  1. Trend (384)
RRP
  1. £0.00 and above (384)

Set Ascending Direction

251-300 of 384

Page:
  2. 4
  3. 5
  4. 6
  5. 7
  6. 8
  1. Trend C049AX1/4TC Pin guided chamfer bevel cutter 45 degrees OL 60mm TRC049AX14TC

    Trend C049AX1/4TC Pin guided chamfer bevel cutter 45 degrees OL 60mm TRC049AX14TC

    POA

    APPROVED RETAILER


    Learn More
  2. Trend C048X1/4TC Chamfer angle= 45 degrees TRC048X14TC

    Trend C048X1/4TC Chamfer angle= 45 degrees TRC048X14TC

    POA

    APPROVED RETAILER


    Learn More
  3. Trend C047X1/4TC Chamfer angle=60 degrees TRC047X14TC

    Trend C047X1/4TC Chamfer angle=60 degrees TRC047X14TC

    POA

    APPROVED RETAILER


    Learn More
  4. Trend C046X1/4TC Chamfer angle= 67 degrees TRC046X14TC

    Trend C046X1/4TC Chamfer angle= 67 degrees TRC046X14TC

    POA

    APPROVED RETAILER


    Learn More
  5. Trend C045X1/4TC Chamfer V groove cutter 45 degrees OL 60mm shank 1/4 TRC045X14TC

    Trend C045X1/4TC Chamfer V groove cutter 45 degrees OL 60mm shank 1/4 TRC045X14TC

    POA

    APPROVED RETAILER


    Learn More
  6. Trend C045CX1/2TC Chamfer V groove cutter 45 degrees OL 71mm TRC045CX12TC

    Trend C045CX1/2TC Chamfer V groove cutter 45 degrees OL 71mm TRC045CX12TC

    POA

    APPROVED RETAILER


    Learn More
  7. Trend C045BX1/2TC Chamfer V groove cutter 45 degrees OL 64mm TRC045BX12TC

    Trend C045BX1/2TC Chamfer V groove cutter 45 degrees OL 64mm TRC045BX12TC

    POA

    APPROVED RETAILER


    Learn More
  8. Trend C045AX1/2TC Chamfer V groove cutter 45 degrees OL 61mm TRC045AX12TC

    Trend C045AX1/2TC Chamfer V groove cutter 45 degrees OL 61mm TRC045AX12TC

    POA

    APPROVED RETAILER


    Learn More
  9. Trend C044X1/4TC Chamfer V groove cutter 45 degrees OL 53mm shank 1/4 TRC044X14TC

    Trend C044X1/4TC Chamfer V groove cutter 45 degrees OL 53mm shank 1/4 TRC044X14TC

    POA

    APPROVED RETAILER


    Learn More
  10. Trend C044X1/2TC Chamfer 45 degrees x 12.7mm diameter TRC044X12TC

    Trend C044X1/2TC Chamfer 45 degrees x 12.7mm diameter TRC044X12TC

    POA

    APPROVED RETAILER


    Learn More
  11. Trend C044BX1/4TC Panel mould cutter 60 degrees TRC044BX14TC

    Trend C044BX1/4TC Panel mould cutter 60 degrees TRC044BX14TC

    POA

    APPROVED RETAILER


    Learn More
  12. Trend C044AX1/2TC Chamfer V groove cutter 45 degrees shank 1/2" TRC044AX12TC

    Trend C044AX1/2TC Chamfer V groove cutter 45 degrees shank 1/2" TRC044AX12TC

    POA

    APPROVED RETAILER


    Learn More
  13. Trend C043X1/4TC Chamfer V groove cutter 60 degrees OL 53mm shank 1/4 TRC043X14TC

    Trend C043X1/4TC Chamfer V groove cutter 60 degrees OL 53mm shank 1/4 TRC043X14TC

    POA

    APPROVED RETAILER


    Learn More
  14. Trend C043X1/2TC Chamfer V groove cutter 60 degrees OL 55mm shank 1/2 TRC043X12TC

    Trend C043X1/2TC Chamfer V groove cutter 60 degrees OL 55mm shank 1/2 TRC043X12TC

    POA

    APPROVED RETAILER


    Learn More
  15. Trend C043CX1/4TC Triple flute engraver angle =60 degrees TRC043CX14TC

    Trend C043CX1/4TC Triple flute engraver angle =60 degrees TRC043CX14TC

    POA

    APPROVED RETAILER


    Learn More
  16. Trend C043BX1/4TC Panel mould cutter 45 degrees TRC043BX14TC

    Trend C043BX1/4TC Panel mould cutter 45 degrees TRC043BX14TC

    POA

    APPROVED RETAILER


    Learn More
  17. Trend C043AX1/4TC Chamfer v groove cutter 60 degrees TRC043AX14TC

    Trend C043AX1/4TC Chamfer v groove cutter 60 degrees TRC043AX14TC

    POA

    APPROVED RETAILER


    Learn More
  18. Trend C042X1/4TC Dovetail cutter angle=99 degrees x 9.5mm diameter TRC042X14TC

    Trend C042X1/4TC Dovetail cutter angle=99 degrees x 9.5mm diameter TRC042X14TC

    POA

    APPROVED RETAILER


    Learn More
  19. Trend C041X8MMTC Dovetail cutter 104 degrees x 12.7mm dia shank 8mm TRC041X8MMTC

    Trend C041X8MMTC Dovetail cutter 104 degrees x 12.7mm dia shank 8mm TRC041X8MMTC

    POA

    APPROVED RETAILER


    Learn More
  20. Trend C041X1/4TC Dovetail cutter 104 degrees x 12.7mm dia shank 1/4" TRC041X14TC

    Trend C041X1/4TC Dovetail cutter 104 degrees x 12.7mm dia shank 1/4" TRC041X14TC

    POA

    APPROVED RETAILER


    Learn More
  21. Trend C041AX1/4TC Dovetail cutter angle=104 degrees 12.7mm diameter TRC041AX14TC

    Trend C041AX1/4TC Dovetail cutter angle=104 degrees 12.7mm diameter TRC041AX14TC

    POA

    APPROVED RETAILER


    Learn More
  22. Trend C040X1/4TC Self guided rebater 35mm dia x 12.7mm cut shank 1/4" TRC040X14TC

    Trend C040X1/4TC Self guided rebater 35mm dia x 12.7mm cut shank 1/4" TRC040X14TC

    POA

    APPROVED RETAILER


    Learn More
  23. Trend C040X1/2TC Self guided rebater 35mm dia x 12.7mm cut shank 1/2" TRC040X12TC

    Trend C040X1/2TC Self guided rebater 35mm dia x 12.7mm cut shank 1/2" TRC040X12TC

    POA

    APPROVED RETAILER


    Learn More
  24. Trend C039X1/4TC One Flute 6.3mm diameter x 25.4mm cut TRC039X14TC

    Trend C039X1/4TC One Flute 6.3mm diameter x 25.4mm cut TRC039X14TC

    POA

    APPROVED RETAILER


    Learn More
  25. Trend C038X1/4TC One Flute 6.3mm diameter x 19.1mm cut TRC038X14TC

    Trend C038X1/4TC One Flute 6.3mm diameter x 19.1mm cut TRC038X14TC

    POA

    APPROVED RETAILER


    Learn More
  26. Trend C037X1/4TC One Flute 6.3mm diameter x 12.7mm cut TRC037X14TC

    Trend C037X1/4TC One Flute 6.3mm diameter x 12.7mm cut TRC037X14TC

    POA

    APPROVED RETAILER


    Learn More
  27. Trend C036X1/4TC One Flute 4.8mm diameter x 11.1mm cut TRC036X14TC

    Trend C036X1/4TC One Flute 4.8mm diameter x 11.1mm cut TRC036X14TC

    POA

    APPROVED RETAILER


    Learn More
  28. Trend C035X1/4TC One Flute 4mm diameter x 11.1mm cut TRC035X14TC

    Trend C035X1/4TC One Flute 4mm diameter x 11.1mm cut TRC035X14TC

    POA

    APPROVED RETAILER


    Learn More
  29. Trend C034X1/4TC One Flute 3.2mm diameter x 11.1mm cut TRC034X14TC

    Trend C034X1/4TC One Flute 3.2mm diameter x 11.1mm cut TRC034X14TC

    POA

    APPROVED RETAILER


    Learn More
  30. Trend C034CX1/4TC One Flute 3mm diameter x 11mm cut TRC034CX14TC

    Trend C034CX1/4TC One Flute 3mm diameter x 11mm cut TRC034CX14TC

    POA

    APPROVED RETAILER


    Learn More
  31. Trend C034BX1/4TC One Flute 1.5mm diameter x 6mm cut TRC034BX14TC

    Trend C034BX1/4TC One Flute 1.5mm diameter x 6mm cut TRC034BX14TC

    POA

    APPROVED RETAILER


    Learn More
  32. Trend C034AX1/4TC Single Flute 2.0mm diameter TRC034AX14TC

    Trend C034AX1/4TC Single Flute 2.0mm diameter TRC034AX14TC

    POA

    APPROVED RETAILER


    Learn More
  33. Trend C033YX1/2TC Craftpro Two Flute Cutter 50.8mm diameter TRC033YX12TC

    Trend C033YX1/2TC Craftpro Two Flute Cutter 50.8mm diameter TRC033YX12TC

    POA

    APPROVED RETAILER


    Learn More
  34. Trend C033X1/4TC Two flute cutter 25.4mm diameter OL 60mm shank 1/4" TRC033X14TC

    Trend C033X1/4TC Two flute cutter 25.4mm diameter OL 60mm shank 1/4" TRC033X14TC

    POA

    APPROVED RETAILER


    Learn More
  35. Trend C033X1/2TC Two Flute Cutter 25.4mm diameter OL 58mm shank 1/2" TRC033X12TC

    Trend C033X1/2TC Two Flute Cutter 25.4mm diameter OL 58mm shank 1/2" TRC033X12TC

    POA

    APPROVED RETAILER


    Learn More
  36. Trend C033WX1/2TC Craftpro Two Flute Cutter 50mm diameter TRC033WX12TC

    Trend C033WX1/2TC Craftpro Two Flute Cutter 50mm diameter TRC033WX12TC

    POA

    APPROVED RETAILER


    Learn More
  37. Trend C033VX1/2TC Craftpro Two Flute Cutter 47.6mm diameter TRC033VX12TC

    Trend C033VX1/2TC Craftpro Two Flute Cutter 47.6mm diameter TRC033VX12TC

    POA

    APPROVED RETAILER


    Learn More
  38. Trend C033TX1/2TC Craftpro Two Flute Cutter 44.5mm diameter TRC033TX12TC

    Trend C033TX1/2TC Craftpro Two Flute Cutter 44.5mm diameter TRC033TX12TC

    POA

    APPROVED RETAILER


    Learn More
  39. Trend C033RX1/2TC Two Flute Cutter 41.3mm diameter TRC033RX12TC

    Trend C033RX1/2TC Two Flute Cutter 41.3mm diameter TRC033RX12TC

    POA

    APPROVED RETAILER


    Learn More
  40. Trend C033QX1/2TC Craftpro Two Flute Cutter 40mm diameter TRC033QX12TC

    Trend C033QX1/2TC Craftpro Two Flute Cutter 40mm diameter TRC033QX12TC

    POA

    APPROVED RETAILER


    Learn More
  41. Trend C033PX1/2TC Craftpro Two Flute Cutter 38.1mm diameter TRC033PX12TC

    Trend C033PX1/2TC Craftpro Two Flute Cutter 38.1mm diameter TRC033PX12TC

    POA

    APPROVED RETAILER


    Learn More
  42. Trend C033NX1/2TC Two Flute Cutter 35mm diameter TRC033NX12TC

    Trend C033NX1/2TC Two Flute Cutter 35mm diameter TRC033NX12TC

    POA

    APPROVED RETAILER


    Learn More
  43. Trend C033KX1/2TC Two Flute Cutter 31.8mm diameter TRC033KX12TC

    Trend C033KX1/2TC Two Flute Cutter 31.8mm diameter TRC033KX12TC

    POA

    APPROVED RETAILER


    Learn More
  44. Trend C033JX1/2TC Craftpro 2 Flute Cutter 30mm dia OL 67mm shank 1/2" TRC033JX12TC

    Trend C033JX1/2TC Craftpro 2 Flute Cutter 30mm dia OL 67mm shank 1/2" TRC033JX12TC

    POA

    APPROVED RETAILER


    Learn More
  45. Trend C033HX1/2TC Craftpro Two Flute Cutter 28.5mm diameter TRC033HX12TC

    Trend C033HX1/2TC Craftpro Two Flute Cutter 28.5mm diameter TRC033HX12TC

    POA

    APPROVED RETAILER


    Learn More
  46. Trend C033GX1/2TC Craftpro Two Flute Cutter 28mm diameter TRC033GX12TC

    Trend C033GX1/2TC Craftpro Two Flute Cutter 28mm diameter TRC033GX12TC

    POA

    APPROVED RETAILER


    Learn More
  47. Trend C033FX1/2TC Craftpro Two Flute Cutter 27mm diameter TRC033FX12TC

    Trend C033FX1/2TC Craftpro Two Flute Cutter 27mm diameter TRC033FX12TC

    POA

    APPROVED RETAILER


    Learn More
  48. Trend C033EX1/2TC Craftpro Two Flute Cutter 26mm diameter TRC033EX12TC

    Trend C033EX1/2TC Craftpro Two Flute Cutter 26mm diameter TRC033EX12TC

    POA

    APPROVED RETAILER


    Learn More
  49. Trend C033CX1/2TC Two Flute Cutter 25.4mm diameter OL 79mm shank 1/2" TRC033CX12TC

    Trend C033CX1/2TC Two Flute Cutter 25.4mm diameter OL 79mm shank 1/2" TRC033CX12TC

    POA

    APPROVED RETAILER


    Learn More
  50. Trend C033BX1/2TC Two Flute Cutter 25.4mm diameter OL 64mm shank 1/2" TRC033BX12TC

    Trend C033BX1/2TC Two Flute Cutter 25.4mm diameter OL 64mm shank 1/2" TRC033BX12TC

    POA

    APPROVED RETAILER


    Learn More

Set Ascending Direction

251-300 of 384

Page:
  2. 4
  3. 5
  4. 6
  5. 7
  6. 8

Opening Times

7.30am - 5.30pm MONDAY to THURSDAY (except Welshpool opening from 7am)

7.30am - 5pm FRIDAY (except Welshpool opening from 7am)

7.30am - 4pm SATURDAY (except Shrewsbury 8am - 4pm)

10am - 4pm SUNDAY

PEFC-FSC

FSC® products available on request. Please contact your nearest branch for further information.

Our History

Company No. 215444

VAT Reg No. 159 0430 72

Learn about the Boys & Boden legacy, from saw mill to venerable builders' merchant.

history banner

Boysa and boden staff photo 1945
Contact Us